Home»Basement Waterproofing»Photo Gallery»Resolving Water Seepage In Bristol, PA

Basement Waterproofing Photo Album: Resolving Water Seepage In Bristol, PA

A homeowner located in Bristol, PA, recently struggled with ongoing water intrusions in their partially finished basement as a result of heavy rainfall. This water seepage was causing concerns of potential rot and structural deterioration prompting the owner to seek out a permanent solution. We sent our system design specialist John to conduct an extensive evaluation on the space in order to provide the owner with the most effective waterproofing approach. Next our foreman Heriberto began installing our specially patented WaterGuard French Drainage System, our TrenchDrain Grated Draining Pipe, our heavy-duty TripleSafe Sump Pump System, as well as, our ultra insulating CleanSpace Wall Vapor Barrier. Together these powerful systems will eliminate water seepage issues, providing this homeowner with a renewed sense of pride in their beloved basement!

Before The Waterproofing Process Began

Our system design specialist carried out a thorough inspection on the home, to supply the owner with the most reliable and long lasting repair approach.

The Initial Start Of Installing WaterGuard

The team begins the installation by drilling weep holes and digging a trench along the perimeter of the basement.

During WaterGuard Install

Next step requires the crew to carefully lower WaterGuard into the trench.

During WaterGuard Install

Before WaterGuard is concealed with a layer of cement we cover the system in clean washed stone to protect from debris.

WaterGuard Fully Installed

This unique French drain is specially designed to be installed below the floor slab, resting on top of the foundation footing. This keeps the drainage system out of the "mud zone", where drains can clog.

TrenchDrain

The grated opening of this system is designed to accept water from the floor, where it's then redirected to the owners perimeter drain and sump pump.

TripleSafe Sump Pump System

The ⅓ hp primary pump can discharge 2,220 gallons of water per hour at an 8-foot head, while the ½ hp secondary pump can discharge as much as 3,900 additional gallons of water per hour at an 8-foot head. In the case of a tripped circuit, power outage, or sump failure, TripleSafe's UltraSump Battery Backup System will kick in. Providing this owner with the ultimate defense against water intrusions!