Expert Foundation Repair in Flemington, Providing Crawl Space Encapsulations and Waterproofing

Don't let tripping hazards ruin your summer fun! This homeowner in Flemington, New Jersey noticed their pool patio was sinking and becoming unlevel. This can happen when concrete is poured over poorly backfilled soil. Over time, this soil settles and creates voids underneath the slab, causing it to become unlevel. If this goes without a repair, people could get injured over the tripping hazards.

The homeowner made a call to Quality 1st Basement Systems after seeing an ad and our customer care representative booked them an appointment with our System Design Specialist, Joseph DelVecchio. Joseph provided a thorough inspection and suggested they use polyurethane foam to lift and level the concrete. 

A few days later, our concrete repair foreman, Dylan McDonald, arrived at the home and began the process of using our PolyLevel Injections. This is done by drilling tiny holes into the concrete and injecting the foam into the voids underneath the slab. This process is repeated until the slab is brought to a lifted position. PolyLevel is lightweight and environmentally friendly and will not add any weight to the existing soil. 

When the job was complete, the homeowner was happy with the outcome. They were able to safely walk on their pool patio without the hazard of tripping! 

A homeowner in Flemington, NJ contacted Quality 1st Basement Systems after discovering water seeping into their basement. Our System Design Specialist, Dane C., inspected the basement and discovered there were small horizontal cracks within the walls, allowing water to seep through. Dan then suggested our waterproofing system would be the perfect solution. 

The main components of the waterproofing system consist of our WaterGuard French Drain System and Triple Safe Sump Pump. The WaterGuard French Drain System is designed to collect water seeping into the basement and guide it to the Triple Safe Sump Pump where it will be pumped away from the basement. Both products are durable and will not easily clog. They also provide the highest form of protection for your basement and are guaranteed to keep the area dry and secure. 

Since the installation, the homeowner did not experience any other water issues with their basement, and they were satisfied with Quality 1st Basement Systems. 

A homeowner in Hunterdon, NJ noticed there was a gap in between their home and shed. They didn't know what the problem was, so they contacted Quality 1st Basements Systems for a solution. Our Operations Manager, Jack, came out and inspected the couple's shed. He saw that the shed was attached to the house, so he looked at the gap and followed to where it leads on the ground, revealing uneven slabs. Over time, the slabs began to sink, eventually creating the gap between the shed and the house. The specialist presented his findings to the couple and they made another appointment for the specialist to return, with his crew, and fix the slabs. 

Our design specialist and our crew fixed the uneven slabs by using the Polylevel System. The crew drilled small holes into the slab and filled the void with structural graded polymers. Once the void has been filled, the expansion of the polyurethane allowed the slab to be lifted to its desired level. Once everything was done, the shed was lifted back to its original level, making the couple completely satisfied. 

The concrete slabs around Virginia's pool area were sinking and settling which caused multiple tripping hazards. Fearing one of her small children would trip and fall into the pool, she decided to search for a solution. Looking to Google for a reliable company, she came across Quality 1st Basements, the local experts in sinking and settling concrete. Customer Service Representative, Kelly, asked a few short questions to make sure she fully understood the concrete concerns Virginia was having and was able to schedule the soonest available appointment with Concrete Repair specialist, Andy G. 

Andy G. did a full inspection of the pool area and noticed a total of 8 sinking slabs that had settled roughly an inch to two inches. He assured Virginia that PolyLevel foam would be the perfect solution since it could raise the existing slab back to level instead of removing and replacing the concrete. The foam is injected underneath the slab filling the void underneath which caused the settling. The foam expands lifting the concrete then hardens to permanently stabilize it. The Quality 1st crew was able to lift and level the entire pool area and within 15 minutes of the team cleaning up, the family was able to use the pool. 

John from Flemington, NJ contacted Quality 1st Basements after noticing water in his basement. He spoke with Customer Service Representative, Christine, about how much water he had and when the water usually occurs. Christine was able to schedule his free estimate appointment with System Design Specialist, Chris Bowe. Within a few short days Chris was in the home, doing a full inspection of the basement to design a solution that best fit the problems John was experiencing in his basement. 

Chris Recommended a full waterproofing system to keep the basement dry and prevent any future water leaks or flooding that could cause damage to the partially finished area of the basement. With a full WaterGuard system and a TripleSafe Sump Pump installed the basement would now stay dry during any rain storm. The team also installed a SaniDry Dehumidifier to eliminate damp, musty odors. Quality 1st Basements was able to put John at ease now that he no longer has to worry about his basement. He can now have piece of mind that his family can enjoy all the perks of having the extra space in his home. 

Homeowner living in Flemington, NJ noticed water seeping in from the middle of the basement floor during heavy rain. The most amount of water they had ever received in the basement was large puddles. They wanted someone to come inspect their basement and provide them with the best solution possible for the home. System Design Specialist, Laszlo lenkey, noticed damp walls, signs of mold and standing water upon his inspection. 

Quality 1st Basement Systems removed the existing sump pump system and installed WaterGuard along the entire perimeter of the basement. Next the crew installed a SuperSump Pump which would collect the pump the water out making the basement 100% waterproofed. The crew  installed a FloodRing around the water Heater as well to protect it against any water leaks. A Sanidry Dehumidifier was installed to properly circulate dry air throughout the basement to create a more comfortable environment. 

The homeowner was so pleased with the work done by Quality 1st Basement Systems that they always recommend Quality 1st to friends and family experiencing water concerns.