Basement Waterproofing Contractor in Barnegat Providing Crawl Space and Foundation Repair

A driveway should provide you with safety, not dangerous tripping hazards! This homeowner in Barnegat Township, New Jersey saw their driveway was sinking and causing issues for them. This can happen when concrete is poured over poorly backfilled soil, and also soil erosion. If this goes without repair, someone could trip and injure themselves! 

The homeowner found Quality 1st Basement Systems after searching online and they gave us a call. Our customer care representative booked them an appointment with our System Design Specialist. Our specialist provided a thorough inspection and suggested they use polyurethane foam to lift and level the concrete.

Our foreman and crew arrived at the home and used our PolyLevel Injections. This process is done by drilling small, penny-sized holes into the concrete and injecting the foam into the voids underneath. PolyLevel is lightweight and environmentally friendly, and it can be installed within 20 minutes!

When the job was complete, the homeowner was satisfied with the job well done, as well as the professionalism they witnessed from our team. Now, they don't have to worry about tripping hazards!

This homeowner in Little Egg Harbor, New Jersey noticed their pool patio was severely sinking and becoming unlevel. This happens because concrete is poured over poorly compacted soil and creates voids underneath. As you can see in the picture, the pool patio can be a dangerous environment since it is unlevel. If gone unrepaired, this concrete patio could sink even more and become costly to fix. 

The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Jay Alvarez, provided an inspection and suggested they use polyurethane foam to lift the concrete.

Our foreman arrived at the job site and began the process of using the PolyLevel Injection System. This is done by drilling tiny holes into the slab and injecting the foam into the voids underneath. PolyLevel is lightweight and environmentally friendly, so it will not add weight to the soil. This process can be done within fifteen minutes and is safe to walk on again.

When the job was complete, the homeowner was happy with the outcome. Their pool patio was lifted and leveled, and they did not have to worry about tripping and injuring themselves.

This homeowner's concrete sidewalk in Barnegat, New Jersey was becoming unlevel. This happens because of the poorly backfilled soil around the foundation. Over time, this soil settles and creates voids under the concrete slab. If an issue like this goes unrepaired, it could pose a dangerous safety hazard.

The homeowner made a call to Quality 1st Basement Systems and our System Design Specialist, Chris Bowe, was able to provide an inspection and help them find a plan for this solution. Upon his inspection, Chris suggested they use polyurethane foam to lift the slab to its original position.

Our foreman, Sean Johnson, used the PolyLevel Injection System to be injected underneath the slab. This process is achieved by drilling small holes into the slab and injecting the foam to fill the voids underneath. This solution is a waterproof and environmentally friendly solution that will not wash out and won't add any weight to the existing soil. 

Within twenty minutes after the installation, the concrete slab was finished and able to be walked on. The homeowner was happy with the outcome and did not experience any other issues with their concrete.

A homeowner in Barnegat, New Jersey noticed their concrete patio was sinking and becoming unlevel. This happens because the soil under the concrete slab settles and creates voids under the slab. If this concrete patio went unrepaired it could be costly in the future and cause even more issues.

The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Chris Bowe, was able to provide an inspection and find a solution to fix this issue. Upon his inspection of the site, Chris noticed how the patio was sinking and suggested a polyurethane foam be injected into the slab to lift and level it.

Our foreman, Sean Johnson, used the PolyLevel Injection System to be injected into the slab to lift it to its original position. This process is done by drilling small penny-sized holes into the slab and injecting the foam into the voids underneath. The polyurethane foam has expanding properties that allow for an accurate lift and leveling of the slab. PolyLevel is a lightweight, waterproof solution that will not add any existing weight to the concrete, and will not wash out.

When the job was complete, the homeowner was pleased with the outcome and the professionalism they saw on the job. They solved the issue once and for all, and do not have to worry about tripping hazards.

A homeowner in Barnegat, New Jersey noticed their concrete patio was sinking and becoming unlevel. This occurs from the poorly compacted soil around the home. Over time, this soil settles and creates a void underneath the concrete. As you can see in the picture, this concrete patio is severely unlevel. This can pose a dangerous safety hazard because a friend or family member can trip over the concrete and hurt themselves.

The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Chris Bowe, provided an inspection and was able to help them find a solution. Upon his inspection, Chris noticed how unlevel the concrete was and suggested they install a polyurethane foam to lift and level the concrete.

Our foreman used the PolyLevel Injection System to be injected underneath the concrete slab. This process is done by drilling small, penny-sized holes into the concrete, and injecting the polyurethane foam into the voids. The polyurethane solution has expanding properties that allow for accurate lifting and leveling of the slab. PolyLevel is a lightweight, waterproof, and environmentally friendly solution that will not add existing weight to the soil.

When the job was complete, the homeowner was satisfied with the outcome. They were able to safely walk on the concrete without the concern of tripping. 

A homeowner in Little Egg Harbor, New Jersey was experiencing foundation settlement. Their walls were cracking and separating in the foundation. This happens because over time, the soil supporting the home changes, becoming very soft or very dry. This leads to the soil weakening and affecting the home's foundation. If gone unrepaired, it can lead to the home needing a bigger repair in the future, which will be more costly.

The homeowner called Quality 1st Basement Systems and our System Design Specialist, Joe Mancini, was able to provide an inspection and help them find a solution to fix this issue. Upon his inspection, Joe noticed how the foundation was settling and cracking. Joe suggested a pier system that will stabilize the home to its original position.

Our foreman, Jonathan Neira, arrived at the home and started to fix the home's foundation. He installed the Steel Push Pier System under the home. This is done by first removing the soil around the foundation's footing and placed a specially engineered bracket. Then, the steel pier sections are hydraulically driven through the bracket to bedrock. Then, the weight of the home is transferred through the steel bracket and onto the new bedrock, lifting the home back to its original position. The soil is backfilled to hide the entire system, and the foundation repair is fully complete.

When the job was complete, the homeowner was pleased with the outcome. Their home was stabilized and they did not have to worry about any costly repairs to fix the foundation settlement.

A homeowner in Barnegat, New Jersey saw that their walkway was shifting and becoming unlevel. This happens because concrete is sometimes poured over loose backfilled soil. Over time, this soil settles and creates voids under the concrete slab. Another common issue is the erosion of soil under the slab. Water runs down through the cracks in the concrete and washes the soil out as it passes through. This can be a dangerous safety hazard because a friend or family member can walk on this walkway, trip and fall, and hurt themselves.

The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Joe Mancini, helped them with a plan to fix this issue. He suggested they use a polyurethane foam under the concrete slab, to lift and level it.

Our foreman, Sean Johnson, used the PolyLevel Injection System to be injected under the slab. This is done by drilling small, penny-sized holes into the slab and injected the polyurethane foam into the voids. The foam has expanding properties that will lift the slab and make it even. PolyLevel has minimal disturbance and does not disrupt the existing concrete. It is also environmentally friendly, lightweight, and waterproof. Now, the homeowner can walk into their home safely without tripping.

A homeowner in Little Egg Harbor, NJ discovered their sidewalk was sinking, and uneven. it is important to repair your sinking concrete as soon as possible because it can affect your home. Such issues include decreasing property value and creating tripping hazards. Another issue could be water seepage that will affect your home's foundation. 

The homeowner contacted Quality 1st Basement Systems and scheduled an appointment with our System Design Specialist, Laura McIntyre. Laura arrived at the home, on time, and inspected the sidewalk. Afterward, she presented her findings to the homeowner and suggested the Polylevel Injection method would be the perfect repair solution.

Polylevel is a long-lasting solution and has many benefits rather than mudjacking. Unlike mudjacking, polylevel is not a mixture of concrete and mud, but rather a foam made from structural graded polymers. It is waterproof, environmentally friendly, and has a quick recovery time of fifteen minutes. It is also immensely strong, lifting between 2,000 to 4,000lbs. 

In conclusion, the homeowner had their sidewalk repaired using the Polylevel Injection method. They were happy with the results as well as the experience. Now, the home looks cleaner, nicer, and the homeowner does not have to worry about tripping hazards. 

A homeowner in Little Egg Harbor, NJ contacted Quality 1st Basement Systems after discovering their concrete porch was sinking an inch. We scheduled an appointment for our System Design Specialist, Laura McIntyre, to inspect the problem and provide a quote for the homeowner. 

Laura arrived at the home, on time, and inspected the concrete porch. Afterward, she presented her findings to the homeowner and mentioned our Polylevel Injection would be the perfect repair method. It has better results than mudjacking and is safer to use.

Unlike mudjacking, polylevel is not a mixture of concrete and mud, but rather a foam made from structural graded polymers. It is inserted into the void of the concrete through small, penny-like holes, so it doesn't create a huge mess on the property. Polylevel is also waterproof, environmentally friendly, and has a quick recovery time of fifteen minutes. 

In conclusion, the homeowner agreed to have their concrete porch repaired using the polylevel injection. After the repair was done and the polylevel was set, the porch had a glowing and new look. The homeowner was thrilled to see this and was fully satisfied with Quality 1st Basement Systems. 

A Barnegat, NJ homeowner contacted Quality 1st Basement Systems after discovering their pool deck was in need of repair. Before closing the pool, the homeowner found multiple concrete slabs were sinking, creating tripping hazards and an uneven look for the entire deck. After speaking with our customer service representative, the homeowner scheduled an appointment with our System Design Specialist, Chris Bowe. 

Chris arrived at the home, on time, and measured the sinking concrete slabs. By measuring the height of the concrete slab, our crew can indicate how high the slab needs to be raised. After inspecting the entire perimeter, Chris presented his findings to the homeowner and recommended the pool deck be repaired with our Polylevel Injection. 

Our Polylevel Injection is our state-of-the-art concrete repair method. Better than mudjacking, polylevel is waterproof, environmentally friendly, and has a quick recovery time of fifteen minutes. Penny-like holes are drilled into the concrete slab, creating less of a mess, and polymers are injected into the void. After the void has been filled, the expansion of the polymers lifts the concrete back to its original height. 

Our foreman, Sean Johnson, and crew repaired the pool deck. Afterward, the homeowner was happy to see their pool deck fully repaired and ready to be closed up for the winter. 

Uneven floors over a crawl space is a big indecator of sagging floor joist. This is exactly what happened to a family living in the Barnegat area. The floors on the first level of the home were beginning to settle, bringing great concern to the homeowners who hadn't been living there very long. Luckly they contacted Qaulity 1st Basement Systems who sent System Design Specialist Laszlo Lenkey, out to inspect the concerns. 

Laszlo recommend SmartJack Crawl Space Support System which would stabilize the sagging joist and gradually bring the joist back to their original state. The SmartJacks provide a permanent solution because they are installed by attached steel support beams to the floor joists and a sturdy base at the floor. Once the posts are installed, they are adjustable to raise the floor. Not only does it bring the floor joist back to its original state but it prevents future sagging. The homeowners were relieved that they no longer had to worry about their floor joist and were very satisfied with their overall experience with Quality 1st.  

Quality 1^st Basement Systems helped a customer resolve his crawl space water problems, and good news travels!  When that customer’s son, Phil, was purchasing a home in Barnegat which had a dirt floor crawl space with some mold growth, Quality 1^st Basement Systems was called to the rescue. 

Mold grows in humid conditions and it needs organic material to grow on.  In order to resolve Phil’s crawl space problems, the solution came in the form of first isolating the house from the earth with a CleanSpace 20 mil thick plastic liner.  This liner is manufactured with an anti-mold and bacteria growth material right in the plastic!  Then, to reduce humidity in the area, Quality 1^st Basement Systems’ specialist also proposed sealing off the vents with vent covers, installing a new, airtight Everlast Door, and installing a SaniDry CX dehumidification system.  All of the products would be working together to thereby prevent mold growth. 

With the project completed, Phil’s goal was met with the prevention of mold growth.  Additionally, the encapsulation and dehumidification system would provide not only a drier, less humid crawl space but also a warmer main level of his home with energy-cost savings!

Sean from Barnegat wanted to fix concrete slabs around his pool that were sinking.  The unlevel area was potentially a tripping hazard.  He searched on-line and found Quality 1^st Basement Systems and scheduled an appointment for a free estimate.

The PolyLEVEL system is a quick fix for sinking concrete slabs.  The process involves the injection of structural grade polymers beneath concrete slabs through small holes.  This causes lifting and leveling the area; in essence, eliminating the tripping hazard.  The environmentally friendly material used in this process is less porous than concrete and will not wash out or deteriorate in the ground.    

Sean found the fix he was looking for.  Quality 1^st Basement Systems completed the work and since PolyLEVEL cures within 15 minutes, Sean’s concrete slabs around the pool were ready to be walked on again in almost no time!