Quality 1st Basement Systems Before & After Photos

This concrete patio in Pittstown, New Jersey, was sinking and becoming unleveled. This happens because concrete is poured over backfilled soil around the home. Over time, this loose soil settles and creates voids under the concrete. As water runs through the cracks and joints in the concrete, it washes out the soil as it passes through. This causes the concrete to shift and settle. The homeowner contacted Quality 1st Basement Systems, and our System Design Specialist, Jeff Pitek came up with a plan to fix this issue. He suggested a polyurethane foam to fill the space under the concrete. Our foreman, Luis Aguirre, used the PolyLevel Injections to stabilize the concrete. This is done by drilling tiny holes in the slab so the polyurethane foam can fill the voids underneath. This will allow the concrete to be lifted and leveled. 

This Pittstown, NJ, homeowner reached out after recognizing signs of settlement surrounding their backyard pool deck area, and in order to eliminate tripping hazards and a complete decline in the structural integrity of the walkway, the owner sought out an efficient and long lasting solution.

Once we extensively inspected the surface, our repair team administered our high-performance PolyLevel Foam Injections directly beneath the sunken portions of concrete, this process successfully restored and lifted the slabs to their designated surface height.

Thanks to PolyLevels restorative capabilities, we have effectively repaired and leveled this pool deck, delivering this homeowner with much needed peace of mind for many years to come! 

System Design Specialist: Nelson Garcia

Foreman: Ash

A Newtown, PA homeowner was interested in repairing their sinking sidewalk, so they contacted Quality 1st Basement Systems for an estimate. Concrete Specialist, JC, inspected the sidewalk and recommended Polylevel Injection as the best repair method. PolyLevel is a waterproof, polyurethane foam, that lifts and levels sinking concrete. 

A Newton, PA homeowner was interested in repairing their concrete walkway, so they contacted Quality 1st Basement Systems for an estimate. As a solution, we used the Polylevel Injection to lift and level the concrete. Since the installation, the homeowner has not worried about any concrete issues around their home.

A homeowner in Hampton, New Jersey had a bowing foundation wall and contacted Quality 1st for a solution. Our System Design Specialist inspected the walls and noticed the bowing. He suggested CarbonArmor be installed on the walls to stabilize them. CarbonArmor is made from reinforced polymer strips that are 10 times stronger than steel. The straps are attached to the wall and secured with heavy duty steel brackets and pull the wall back to its original position. CarbonArmor installs quickly and will not impact future basement finishing.