Concrete Lifting and Leveling Before & After Photos

An entire front walkway and landing had settled at this home in Manahawkin, NJ. The homeowner wanted it raised since replacing this beautiful area was not an option for them. When they heard about concrete raising, they contacted Quality 1st Basement Systems to learn more about our Concrete Repair System known as PolyLevel. PolyLevel is injected under a sinking concrete slab to fill the void and raise it back towards its original position. This installations is environmentally friendly and does not disturb the surrounding area. Check out this great before and after! 

This customer reached out to Quality 1st Basement Systems to raise the sinking concrete near the front door. Our crew came out and drilled small holes in the concrete slab. Using special equipment, we inject polyurethane foam known as PolyLevel, underneath. Now concrete settles because the soil is either too wet, too dry or poor compacted which makes it weak causing settlement. PolyLevel fills any voids between the soil and the slab by expanding and raising the concrete. Once its leveled, PolyLevel hardens to stabilize the slab. 

The concrete around this pool was sinking and settling. Our team injected Polylevel beneath the slab to lift and level the concrete. Once the concrete was leveled, they filled the holes with concrete mix and sealed the joints to prevent water from eroding the slab further. Within just 15 minutes of the installation being compelted the homeowner and his family had full access to their pool are. 

Quality 1st Basements removed the trip hazard near the steps of the shallow end of pool by raising the sinking slab back to level. Our team drilled small, penny-size holes into the concrete slab and injected Polyurethane foam known as PolyLevel below. PolyLevel is a light weight foam that expands to lift the heavy slab. Once the slab is leveled, the foam hardens to stabilize the slab to prevent future movement.  

Check out this pool deck repair we did in Stafford, NJ. The homeowner noticed the concrete slabs around the pool had become uneven creating small gaps in between the joints. Our System Design Specialist, Jay Alverez, fully inspected the area and recommended lifting the slabs with our concrete raising system, PolyLevel. Raising the slabs back to level to remove the gaps between the joints.