Concrete Lifting and Leveling Before & After Photos

This front step of a Medford, NJ property was experiencing severe settlement in its concrete. Quality 1st Basements was contacted to lift and level the homeowner's front step with PolyLevel. With PolyLevel, all voids underneath the slab were filled and the slab was pushed up to a level position. The cracks were sealed up with NexusPro Sealant. 

A homeowner in Medford, NJ noticed their driveway was sinking and causing tripping hazards. As a solution, we injected PolyLevel underneath each area of sinking concrete to raise it back towards its original position. PolyLevel is a lightweight and environmentally friendly foam, that fills all voids between the soil and the concrete slab. Once stable, the homeowner can access their driveway in as little as 15 minutes! 

This homeowner in Hainesport, New Jersey noticed their concrete sidewalk was sinking and becoming unlevel. This can happen when concrete is poured over poorly backfilled soil. Over time, this soil settles and creates voids underneath. The homeowner contacted Quality 1st Basement Systems and our System Design Specialist provided a thorough inspection and suggested they use polyurethane foam. Our foremen used our PolyLevel Injections foam underneath the concrete. This process is repeated until the concrete is brought to a level position. When the job was complete, the homeowner was satisfied with the outcome and they were able to safely walk on their sidewalk without the concern of tripping hazards! 

Quality 1st Basement Systems lifted the concrete at this Pennington, New Jersey property with PolyLevel. PolyLevel raised the sunken concrete up into place. Now the concrete is level and the homeowner no longer worries about it being a dangerous trip hazard outside of his home.

As you can see in the picture above, this slab in front of the back door of this home had settled. Our team raised the slab by injecting PolyLevel foam underneath to raise and stabilize it permanently.