Concrete Lifting and Leveling Before & After Photos

Wow! Concrete replacement is a thing of the past when it comes to sinking and settling concrete slabs. Our team raised this sinking slab back towards its original level using PolyLevel. PolyLevel is injected by drilling a small penny-size hole into the concrete. Using a special tool, the Polyurethane foam is injected underneath the slab. The foam expands to fill all voids underneath the soil and begins raising the slab. When leveled, the team will stop injected and immediately the foam will begin to harden, permanently stabilizing the concrete slab. 

Outside of this Sicklerville, PA home, the concrete driveway was experiencing signs of settlement that left it uneven, concerning the homeowner of the tripping risks it posed. Wanting to find a reliable solution, the homeowner reached out to Quality 1st. Once our System Design Specialist Ryan assessed the damage to the concrete, our Foreman Ash and his team were able to carry out the proposed repair plan. Using our PolyLevel Foam Injection and our NexusPro Crack Repair, our crew was able to restore the concrete slabs to a safe and level position!

When this homeowner from Sicklerville, NJ noticed their driveway was sinking and cracking, they knew it was only a matter of time before it became a serious hazard. Uneven concrete slabs had created tripping points and were beginning to affect their home’s curb appeal. After some research, they decided to go with PolyLevel and NexusPro, a decision they don't regret.

The crew arrived and quickly lifted the sunken sections of the driveway using PolyLevel, a foam that expands to fill voids beneath the concrete, stabilizing it permanently. Once the slabs were level, they sealed the cracks and joints with NexusPro, a flexible, long-lasting sealant designed to withstand weather and movement.

In just a few hours, the homeowner's driveway looked like new, safe, even, and ready to handle the seasons ahead. No more tripping hazards, and no more eyesore. Now they've got peace of mind and a driveway that’s built to last.

An Annandale, NJ homeowner was interested in repairing their pool deck, so they contacted Quality 1st Basement Systems for an estimate. We used the Polylevel Injection to lift and level the concrete. Small cracks had formed due to the movement in the concrete slabs over time. Our team raised each area back towards its original position and sealed every crack throughout the pool area. 

A homeowner living in Moorestown noticed their sidewalk near their home had settled a few inches, which created a tripping hazard. The homeowner contacted Quality 1st Basements as they would offer the best solution to the homeowner's problem.

System Design Specialist, Tom Carrano, inspected the homeowner's sidewalk and recommended PolyLevel as it would easily raise each concrete slab of the sidewalk in a short amount of time. The Project Manager and his crew injected Polylevel into the sidewalk raising it back up. Polylevel is a clean installation, therefore no dust, grout overflow, or concrete splatter will occur

Now the homeowner is relieved that the tripping hazard has been removed thanks to Quality 1st Basements.