Concrete Lifting and Leveling Before & After Photos
Click on a photo to enlarge.
Sinking Concrete by a Pool in Voorhees, NJ
A homeowner from Voorhees, NJ knew his unlevel concrete pool deck needed to be fixed to prevent family and friends from tripping. The homeowner called Quality 1st Basements to complete the job. PolyLevel was used to lift the concrete up so it was level and it only took 15 minutes to cure. The homeowner could now invite people over to use his pool on hot summer days without worrying about any injuries.
Sinking Front Steps in High Bridge, NJ
Homeowner contacted Quality 1st Basement Systems after seeing an Ad for Concrete Lifting and Leveling. Concrete Repair Specialist, Jeffrey Pitek inspected about 4 inches of settlement. The Q1 team was able to lift and level the stairs, permanently stabilizing them using PolyLevel. A small hole is drilled into the concrete steps and PolyLevel was injected underneath to raise the slab back to its original position. Within 15 minutes of job completion, the homeowner was able to use his front steps.
Concrete Repair in High Bridge, NJ
A homeowner in High Bridge, New Jersey noticed their concrete was sinking and settling, so they contacted Quality 1st Basement Systems. As a solution, we used our PolyLevel Injections which will bring the concrete to a raised position. The entire stairway up to the door was now raised and stabilized.
Concrete Sidewalk Repair in Sicklerville, NJ
Quality 1st Basement Systems was contacted by this homeowner in Sicklerville, New Jersey to inspect their sinking sidewalk. We went to the home, provided our inspection, and suggested using our PolyLevel Injections. This process is done by drilling holes into the concrete slab and the foam is injected into the voids underneath. PolyLevel is a lightweight and environmentally friendly solution that will not add any weight to the existing soil. Our PolyLevel solution will bring the concrete to a raised position and will eliminate any tripping hazards!
Sidewalk Way Leveled in Sicklerville, NJ
Wow! Concrete replacement is a thing of the past when it comes to sinking and settling concrete slabs. Our team raised this sinking slab back towards its original level using PolyLevel. PolyLevel is injected by drilling a small penny-size hole into the concrete. Using a special tool, the Polyurethane foam is injected underneath the slab. The foam expands to fill all voids underneath the soil and begins raising the slab. When leveled, the team will stop injected and immediately the foam will begin to harden, permanently stabilizing the concrete slab.
