Click on a photo to enlarge.
Quality 1st Basement Systems used PolyLevel to raise the sinking concrete slabs at this Edison home. PolyLevel Injection is a state-of-the-art system that uses high-density polymers to raise slabs back to a desired level. This is done by drilling small holes in the slab and then specially designed equipment is used.
A homeowner experiencing a cracked and settling driveway contacted Quality 1st Basements. The homeowner had four cracked and sinking slabs in their driveway which was unsightly and created a tripping hazard. Luckily, Quality 1st had the right expertise to help solve the homeowner's issue.
PolyLevel was recommended by System Design Specialist, Jeffery Pitek, as it would easily lift the concrete and make the transition from the driveway to the garage even. PolyLevel Manager, Sha Chon Kasey, and his crew injected PolyLevel into the driveway, lifting each slab back to its original position and filling out the cracks,
With the driveway raised by PolyLevel, the homeowner problem was solved.
This homeowner from Edison, NJ wanted a quick solution for his sinking concrete patio. His children liked to play outside in the backyard but the gap from the sinking concrete was creating trip hazards and prevented them from safely playing. The homeowner called Quality 1st Basements to resolve the sinking concrete. Our team injected our PolyLevel solution beneath the surface of the concrete. This lightweight but strong foam was able to lift and level the heavy slabs of concrete within minutes. The foam takes a maximum of 15 minutes to cure, so the kids were able to go back to playing outside the same afternoon it was applied.
A resident in Edison, New Jersey noticed their concrete was sinking. They called Quality 1st Basement Systems and our System Design Specialist, Jack Huber, helped them with a solution to this problem. He suggested they inject polyurethane foam into the concrete slab to help raise the concrete. Concrete sinks and settles because of soil shrinkage, poorly compacted soil, and soil that is too wet or too dry. Our foreman, Luis Aguirre, installed the PolyLevel Injections foam into the slab. This foam will fill the void below the slab, which will level and raise it back to the original position. The installation is quick and easy and is done by drilling small penny-sized holes into the slab.
An Edison, NJ homeowner noticed their pool deck was sinking, so they contacted Quality 1st Basement Systems for a solution. The area near the pool stairs to the low end was sinking causing a trip hazard near the entrance to the pool. We used the Polylevel Injection to lift and level the concrete. Once the pool deck was leveled, our crew used a waterproof joint sealant to seal any gaps within the concrete.