Foundation Repair Before & After Photos

When the homeowner noticed vertical cracks in their basement wall they called Quality 1st to do the job. System Design Specialist, Ken Peare, did a full inspection of the basement to make sure that these cracks were the only cracks in the foundation of the home. Foreman, Melvin Cardoza, installed FlexiSpan into the cracks sealing them to prevent water from coming through. First bead of Sealant is placed inside the crack to stop crack leakage. A FlexiSpan Foam Drain Strip is then placed over  as a second form of protection against water leakage through the first seal, followed by the permanent seal overlay. 

This homeowner in Mount Laurel, New Jersey noticed their basement wall was bowing inwards. This occurs because poorly compacted and saturated soil around the foundation creates hydrostatic pressure against the walls. The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Javier Romero, provided an inspection and suggested they use a wall reinforcement system. Our foreman, Esau Aquino, installed the CarbonArmor Wall Reinforcement System which is made from a fiber-reinforced polymer that is 10 times stronger than steel. The straps are attached to the wall and secured with heavy-duty steel brackets. The straps will stabilize the wall and begin to pull it back to its original position. 

A homeowner in Flemington, New Jersey needed their foundation stabilized and contacted Quality 1st for a solution. Helical Piers were installed in order to restore the foundation. Helical Piers have helical plates welded to the pier shaft. These plates help to pull the pier into the soil and provide an anchor as the weight of the foundation or structural element is transferred to the pier. Helical Piers are a fast, effective installation and can help lift settled foundations back to the original level.  

Smart Jack XT's were installed in the basement of the a resident from Flemington, NJ. The floors were sagging and needed structural support. Foreman Jonathan Neira and his team installed the Smart Jacks system to make sure it permanently lifted and stabilized the existing beams.

Quality 1st Basements was contacted by the homeowner and engineer for a property located in Evesham Township in regards to large foundation cracks on the interior of the foundation. Doing some research online, they discovered our Carbon Armor Wall Reinforcing Wall System and right away knew this was the solution they were looking for. 

Victor Leon and his crew with help from Foundation Repair Specialist, Andy Gagliardi, were able to stabilize the foundation walls by installation 19 Carbon Armor Straps directly to the foundation walls.