Foundation Repair Before & After Photos

A homeowner in Jefferson, New Jersey had a cracked and bowing wall in their foundation. The homeowner found Quality 1st while looking for solutions on the internet. The PowerBrace Wall Repair System was installed in the home to stabilize the foundation walls. The PowerBrace consists of steel l-beams that are secured to the joists above the wall with steel brackets. This system is easily adjustable, allowing the brace to be tightened and to attempt to raise the wall back to its original position.      

A homeowner in Randolph, New Jersey noticed that their walls were bowing and causing problems. The homeowner contacted Quality 1st for a solution. System Design Specialist, Mike B inspected the home and suggested that the GeoLock Wall Anchors be installed. These anchors are specially designed for what the homeowner was experiencing. The wall anchors are made of galvanized steel for a long-lasting solution that will prevent any further inward movement of the walls. These anchors extend from the wall to the stable, soil beyong the home. They areanchored into the stronger soils, brace the foundation wall, preventing further movement. These anchors are installed with minimal invasion and can be easily concealed. 

When this homeowner from Princeton Junction, NJ noticed horizontal cracks forming along their basement walls, they knew it was a sign of foundation wall movement and needed a reliable solution. To stop the cracking and reinforce their foundation, they chose to have CarbonArmor installed.

CarbonArmor uses strong, flexible carbon fiber straps, ten times stronger than steel in tension, to stabilize bowing or cracking foundation walls. These straps are bonded tightly to the wall surface, preventing further movement and restoring structural integrity without invasive excavation or major disruption.

Now, the homeowner has peace of mind knowing their foundation is secure, and their basement walls are reinforced with a long-lasting, maintenance-free solution designed to stand the test of time.

An unfinished basement in Manville, New Jersey had bowing walls and a large crack in the foundation. The floor dropped 1/4 of an inch, and the homeowner needed Quality 1st Basement System's help. Inspector Kenny Tramutola determined that the best solution was to push piers to lift the basement floor and stabilize the walls. A foundation bracket was installed against the footing and piers were driven into the foundation bracket and the soil. It then lifted the structure using high-strength steel. Push piers are strong with high capacity loads and galvanized steel. Now this basement will not bow and the walls are stable and safe.

A Basking Ridge, New Jersey homeowner noticed their basement walls were bowing inwards, so they contacted Quality 1st Basement Systems for a solution. We installed the CarbonArmor Wall Reinforcement System to stabilize the walls and prevent them from bowing further. After the installation, the walls were repaired and the homeowner's peace of mind was restored.