Click on a photo to enlarge.
A Middletown, NJ homeowner discovered a few of their pool deck slabs were sinking, so they needed to find a repair. They contacted Quality 1st Basement Systems for a solution. We used the Polylevel Injection to lift and level the concrete.
A homeowner in Middletown, NJ, had been experiencing a sinking driveway for years. Because the slabs were uneven, water would pool in specific areas, creating erosion underneath. We sent a Concrete Repair Specialist, Joe, out to inspect the driveway and provide them with a solution. He recommended a polylevel lift and leveling the area since the concrete slabs were in good condition and there was no significant cracking or crumbling. Instead of paying to remove and repour this entire driveway, our Concrete team was able to lift, level and stabilize this area and restore this homeowner's peace of mind.
The owners of this Middletown, NJ were concerned with the sinking concrete slabs of their walkway. Not only was it an eyesore, it was a tripping hazard. Quality 1st Basement Systems lifted the concrete slabs using the PolyLEVEL concrete leveling system. The sideways now look great and are safe for all to use!
We were recently contacted by this Middletown NJ homeowner who was struggling with pesky sunken concrete slabs surrounding their backyard pool deck. After scheduling a formal meeting with our system design specialist Nelson, we were able to supply the owner with the most efficient and reliable solution. Next our foreman Ash and his team of concrete repair professionals began installing our PolyLevel Foam injections to essentially lift and restore the settled slabs to their original height, following this process the crew also applied our specially patented ultraviolet resistant NexusPro Joint Sealant to ensure the surface is safeguarded from erosion. Thanks to the power of these two products, this homeowner can now proudly rejoice in their newly reinforced poolside patio!
The concrete around the exterior of this Middletown, NJ home was facing the wear and tear of the outdoors. Sinking slabs due to erosion beneath the concrete resulted in an uneven surface that the homeowner knew was a safety issue and wanted to fix it. Our crew at Quality 1st had just the solution to these uneven concrete slabs. After our System Design Specialist Nelson provided the homeowner with a quote, our Foreman Ramon and crew met at the site to carry out the leveling process on the concrete. Our PolyLevel Foam Injection was used to raise these slabs to their correct position, leveling out the surface. Light weight, waterproof, and nonharmful, the PolyLevel Foam is a stable and durable solution to raising sunken concrete slabs and keeping them leveled. Our NexusPro Joint Sealant was used to seal the cracks in between slabs, giving the concrete area that nice, cohesive finish.
Take a look at this clean, level surface we left the homeowner with. They were very happy with our repair and can now enjoy time outside their home without any safety hazards.