Click on a photo to enlarge.
A homeowner in Avalon, NJ noticed their concrete was sinking and settling. Small trip hazards formed creating an unsafe walkway which could cause a serious injury. The homeowner wanted to prevent an issue and needed to address the walkway area before all the walking traffic this summer. As a solution, we used PolyLevel, a waterproofing and light weight polyurethane foam that brings the concrete back towards its original position, stabilizing each concrete slab. Now, the homeowner doesn't have to worry about trip hazards and has peace of mind.
This homeowner was experiencing concrete settlement due to soil eroding beneath the concrete slabs. After our PolyLevel team injected polyurethane formula beneath the settling slabs, the deck was raised back to its original position. The PolyLevel process is quick and causes minimal disruption. This homeowner was able to enjoy their pool within 15 minutes of the installation being completed!
The concrete slabs around this pool area had created a small trip hazard near the edge of the pool. The goal was to remove teh trip hazard and stabilzie the concrete to prevent future settlement. Concrete Repair Specialist, Jack Huber recommended PolyLevel, to lift, level and stabilzide the slab.
This Tabernacle, NJ back patio was settling creating a pitch towards the house. This meant that every time it rained, water would pool. We sent out Concrete Repair Specialist, Chris Bowe, out to provide a full inspection and see how we could help repair this patio. Chris recommended our Polylevel Injection known as PolyLevel to lift, level and stabilize the area. We use Polylevel, because it provides a long-lasting solution for our homeowners. Polylevel is waterproof, environmentally friendly, and takes fifteen minutes to recover. It is also more durable and does not create a large mess for the home.
This homeowner in Plainsboro, NJ contacted Quality 1st Basement Systems to repair the sinking porch in the front of the home. Quality 1st was able to raise the porch back to level using PolyLevel. PolyLevel is a quick installation with lasting results, making it a better choice then removing and replacing the concrete. A small whole was drilled into the concrete and a hard foam solution is pumped into the slab which hardens and expands raising the concrete slab.