Crawl Space Repair Before & After Photos

A Forked River, NJ homeowner knew there was a problem with their home when they noticed the floors had begun to sag. They hadn't been down in their crawl space in some time and therefore called Quality 1st Basement Systems to do a full inspection and provide a solution.

Our Systems Design Specialist, Jack Huber, visited the homeowner and did a full inspection of the crawl space. He noticed the crawl space beams below were sagging and needed additional support to the beams. Jack suggested installing the 3-ft SmartJack System.

Our foreman, Jonathan, Niera, and his crew got to work and installed the SmartJack System. Each SmartJack is installed to the beam to provide additional support. Since the system is adjustable, it allows for the beams to gradually move back towards original position. 

This home in Sloatsburg, NJ sat above a crawl space that was dark, damp, and musty due to unwanted moisture sitting in the space. To fix this problem, the homeowner reached out to Quality 1st for a waterproofing solution. Our team assessed the space and equipped it with a new system that would keep water out and regulate the temperature inside. CleanSpace Vapor Barrier was lined along the floor, up the walls, and around the support piers in the basement to seal out leaking water. Our SilverGlo Insulation is made up of a closed-cell material that won't absorb moisture and, therefore, won't rot or mold. The insulation panels were installed across the walls, with a radiant heat barrier on the interior side of the insulation panels to regulate the temperature. The home was also equipped with a Sedona Dehumidifier to keep the circulating air clean and free of moisture. Now, this home will have a lasting dry and controlled environment in the crawl space!

A homeowner in Sloatsburg, New York was experiencing high moisture and a musty odor in their crawl space. System Design Specialist, Dan, came out and provided a full inspection of the crawl space. He recommended encapsulation to seal the crawl space off. Quality 1st Basement Systems and our foreman, Jonathan Neira, installed the CleanSpace Vapor Barrier System which seals the crawl space from the earth. This gives a bright and fresh appearance while preventing any water or moisture from seeping through the foundation. 

A homeowner in Paterson, New Jersey was looking for a solution to fix their wet basement. Wet basements occur when the soil around the home becomes saturated and creates hydrostatic pressure, pushing water into the basement. The homeowner contacted Quality 1st basement Systems and System Design Specialist, JC Gibriano, who was able to inspect the home and suggested they encapsulate the basement. Our foreman, Juan Garcia installed the CleanSpace Vapor Barrier System along the basement wall. This system will catch any water that seeps in from the walls and drain it to a sump pump. CleanSpace gives the basement a bright and fresh appearance while being water-proof and mold-proof. 

A homeowner in Newark  had a  crawl space that had water and dampness so they contacted Quality 1st Basements for a solution. Our System Design Specialist inspected the crawl space and recommended  encapsulation to eliminate the dampness.

First,  SilverGlo was installed on the crawl space walls to boast a radiant barrier that reflects heat back into the crawl space. CleanSpace Vapor Barrier was installed on the crawl space walls and floors to seal off the crawl space and make sure no water vapor or humidity passes through. This liner is durable and is ideal for homeowners who want to use their crawl space for storage. Any air in your crawl space travels up throughout the eniter home and so its important to make sure your crawl space is clean and dry to increase the wuality of air you and your family breathe in everyday!