Crawl Space Repair Before & After Photos

We helped this customer with crawl space repair.

This customer had a very damp and humid crawlspace that was causing mold to grow and the current insulation to fall down. To start off this project we first removed all the old damp insulation and then treated the mold with our Mold-X2 treatment. Next, we installed our SilverGlo insulation wall panels and sprayed our spray foam insulation. Following our insulation install, we put down our CleanSpace Vapor Barrier, install a SmartPump with Smart Pipe and then we finish up the install with a SaniDry Sedona Dehumidifier. 

Over time, a homeowner in Elkton, MD, began to notice their crawl space becoming increasingly damp and deteriorated. Persistent water seepage and a lack of proper drainage support had taken a toll on the area, raising concerns about potential mold growth and structural damage. Recognizing the severity of the issue, the homeowner contacted Quality 1st for a professional assessment and long-term solution to protect their home.

After a thorough inspection, our team designed a customized waterproofing strategy tailored to the specific needs of the crawl space. We installed our patented SilverGlo Insulation Panels to provide both thermal protection and resistance to moisture intrusion. To further safeguard the space, we added our CleanSpace Vapor Barrier System, a mold-resistant liner that effectively seals out humidity and ground moisture.

These systems worked together to eliminate the damp conditions, transforming the crawl space into a dry, healthy, and structurally sound area for the homeowner’s peace of mind!

Concerned about a persistent musty odor and damp conditions beneath their home, this Elkton, MD homeowner suspected their crawl space was the source of the problem. Aware of the risks that excessive moisture can pose, such as structural damage, wood rot, and mold growth, they reached out to Quality 1st for help. Our team conducted a comprehensive inspection and quickly identified signs of water seepage and high humidity levels within the crawl space. These conditions not only threatened the structural integrity of the home but also had the potential to impact indoor air quality.

To properly address the issue, we installed our CleanSpace Vapor Barrier System, a durable, antimicrobial liner designed to seal the crawl space from the earth below and prevent moisture infiltration. This system was carefully fitted across the floor and up the walls to create a continuous, airtight barrier. With CleanSpace in place, we effectively stopped water vapor from entering the crawl space, eliminated damp conditions, and restored the area to a dry, healthy environment.

Thanks to this long-term solution, the homeowner can now enjoy a more comfortable living space above and lasting protection below.

In the dirt-floor crawlspace, we were able to encapsulate it by installing our CleanSpace system. We wrapped the CleanSpace around each of the bottom piers and surrounding walls along the perimeter, which is placed over our drainage matting that lies under the liner. By covering the dirt floor, we are able to prevent any moisture that can slip into the home, mold growth, and pests.