Foundation Repair Before & After Photos

A Riverton, NJ homeowner discovered signs of foundation failure in their home. These signs included sticky doors and windows, and horizontal cracks forming across their cinderblock foundation. Quality 1st Basement Systems resolved the issue by installing the Carbon Armor Reinforcement System, which stabilizes the foundation and prevents it from settling further. Since the installation, the homeowner has not experienced any other foundation issues in their home.

System Design Specialist: Greg L.

Foreman: David B.

This homeowner in Belvidere, New Jersey noticed their walls were cracking and starting to bow inwards. This happens because loose soil after construction creates an active wedge where water can easily flow into it, and create hydrostatic pressure. The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Jay Alvarez, suggested they use a non-invasive solution to permanently stabilize the walls. Our foreman used the CarbonArmor System which is flexible carbon fiber fabric straps. The fiber straps are bonded to the inner face of the wall to stabilize it.

Cherry Hill homeowner had multiple cracks in his basement foundation and basement flooding. Quality 1st completed the foundation repair and fixed the cracks in the wall, waterproofed the basement using the WaterGuard draining system, then refinished the basement using ThermalDry Wall System. ThermalDry not only increases energy savings in the home as its foil face reflects heat back into the basement, but is made of inorganic materials which means it will not grow mold and will keep water out!

Are you experiencing sagging floors on your first floor? This is exactly what prompted this Trevose , PA homeowner to contact Quality 1st Basement Systems! After noticing gaps where the molding met the floor, this home owner noticed their basement beams were sagging. Nervous that serious damage could occur, they contacted the experts to provide an inspection. System Design Specialist, Laszlo, recommended our SmartJack Stabilizer System would be the best solution. SmartJacks are designed to provide additional support to weak and sagging beams to restore stability to the floors above.

The floors in the home this  Feasterville Trevose, PA home were sagging. Quality 1st Basement Systems came out and performed a free inspection to figure out what was causing this issue. Our Foundation Specialist, noticed beams and floor joist in the basement were sagging due to high levels of moisture and humidity. The wooden beams were absorbing that moisture, weakening each beam. To provide additional support to the beams and prevent future movement, our team installed our SmartJack System.

This system will not effect the homeowners opportunity to finish the basement in the future. Our team was able to restore this homeowners peace of mind by waterproofing their basement and providing support to their first floor beams.