Click on a photo to enlarge.
When the homeowner noticed vertical cracks in their basement wall they called Quality 1st to do the job. System Design Specialist, Ken Peare, did a full inspection of the basement to make sure that these cracks were the only cracks in the foundation of the home. Foreman, Melvin Cardoza, installed FlexiSpan into the cracks sealing them to prevent water from coming through. First bead of Sealant is placed inside the crack to stop crack leakage. A FlexiSpan Foam Drain Strip is then placed over as a second form of protection against water leakage through the first seal, followed by the permanent seal overlay.
Quality 1st Basements was contacted by the homeowner and engineer for a property located in Evesham Township in regards to large foundation cracks on the interior of the foundation. Doing some research online, they discovered our Carbon Armor Wall Reinforcing Wall System and right away knew this was the solution they were looking for.
Victor Leon and his crew with help from Foundation Repair Specialist, Andy Gagliardi, were able to stabilize the foundation walls by installation 19 Carbon Armor Straps directly to the foundation walls.
A Marlton, NJ homeowner noticed the floor on the first level of their home was sagging and uneven. Their home sits on a crawl space and therefore our Crawl Space Specialist knew right away the problem was coming from below. What happens is the crawl space beams and floor joist lack the support needed for the floor above. The best solution for this problem is our
SmartJack Crawl Space Support System which restore stability to the floors by providing the additional support it needs.
A homeowner in Glen Gardner, New Jersey reported their walls bowing inwards and cracking. This is a major sign of foundation issues and can happen because the soil around the home's foundation settles and becomes saturated. The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Laszlo Lenkey, provided an inspection of the home. He suggested they install a strap support system to bring the wall to its original position. Our foreman, Esau Aquino, installed The CarbonArmor Wall Reinforcing System which is carbon fiber straps that are stronger than steel. The Carbon Armor Straps provide the ultimate stabilization to the wall and are placed on the wall with a high-strength epoxy resin. There are brackets above the system that allow the straps to be adjusted to bring the wall towards the original position.
A basement in Willingboro, NJ had bowing walls that needed fixing. Quality 1st Basement Systems stabilized it with CarbonArmor, which is stronger than steel.